Bare-Tool Makita BGA452Z 18-Volt LXT Lithium-Ion Cordless 4-1/2-Inch Cut-Off/Angle Grinder (Tool Only, No Battery)

Buy Cheap Bare-Tool Makita BGA452Z 18-Volt LXT Lithium-Ion Cordless 4-1/2-Inch Cut-Off/Angle Grinder (Tool Only, No Battery)

Buy Low Price From Here Now
This 18-volt cordless cut-off/angle grinder from Makita has an LXT Lithium-Ion battery and an optimum charging system that produces 280 percent total lifetime work, with twice the cycles of an ordinary battery. This tool grinds up to 50 percent faster, with an impressive 10,000 rpm top speed -- and its ergonomic shape fits like a glove, offering even pressure and smooth control. The BGA452Z features a built-in electronic control circuit with LED warning lights for overload protection, a slide switch with lock-on, and a compact design that's only 12-1/2 inches long and weighs just 5.6 pounds.
Readmore

Technical Details

- Makita-built motor delivers 10,000 RPM for 50% faster grinding
- Compact, ergonomic design at 12-1/2 inches long and weighs only 5.3 lbs. for reduced operator fatigue
- A built-in L.E.D. protection circuit with over-torque control protects the motor
- Makita LXT Lithium-Ion battery and Energy Star rated 30-Minute Rapid Optimum Charger produces 430% total lifetime work with 2.5X more cycles
- 3-year warranty on tool
See more technical details

 "Makita battery angle grinder" 2010-02-02
By Thomas J. Duncan (USA)
Nice product does not have the power of a corded unit but does a nice job when you need it

 "Thumb switch shuts off all the time!" 2009-11-10
By El Cucuy (Mexifornia)
This grinder is pretty good for a cordless. Only two complaints.

1. When battery gets low or if you are pressing too hard the red light goes on and the grinder shuts off. It does this all the time.

2. Thumb on/off switch turns off way too easily. If you barely touch it shuts off.



Other than that no complaints. I bought it because I was installing a lot of commercial steel doors and always needed a grinder for thresholds, door shoes and sweeps, and all the other little items that needed to be trimmed. I've also used it recently (just light use) with a diamond blade for cutting tile, bricks, and concrete; Mostly for items that interfere with the installation of doors.



If I could make any improvement it would be to change the switch to make it not so touchy.

 "Great Grinder" 2009-08-15
By Randall Carlson (Near San Francisco)
I've had a Makita XLT kit for about a year now, and there have been several occasions when I really wished that I could just snap an 18-volt battery on a portable grinder and do a small job. Finally, when my wife wasn't looking, I decided to pull the trigger--and am I glad I did. I used it immediately to cut through a metal sink drain (Think: water), a situation where a saw was clumsy and a 110v grinder would be folly. Fast and powerful cutting!



I would not recommend this tool for heavy-duty, repetitive work, but smaller for jobs it is convenient and more than adequate.

 "Excellent cordless grinder" 2009-06-01
By P. Tjarks
I have had a Ryobi grinder for years and it was fine as long as you did not need it to work more than five minutes or grind anything more than the galvanize coating off of metal, but this Makita is a real workhorse, the battery lasts and it seems to be just as powerful as my small corded Makita grinder

 "handy" 2009-02-05
By J. R. Sheehy (Boston, MA)
its handy to have- cuts bolts easily and fits hands well. it kills batteries a little quick, but its not really intended for heavy duty use. if you're into the makita system already, this is a good product. if not, then i'd consider the real expensive milwaukee


Images Product

Buy Bare-Tool Makita BGA452Z 18-Volt LXT Lithium-Ion Cordless 4-1/2-Inch Cut-Off/Angle Grinder (Tool Only, No Battery) Now

Bare-Tool Makita BSS610Z 18-Volt LXT Lithium-Ion Cordless 6-1/2-Inch Circular Saw (Tool Only, No Battery)

Buy Cheap Bare-Tool Makita BSS610Z 18-Volt LXT Lithium-Ion Cordless 6-1/2-Inch Circular Saw (Tool Only, No Battery)

Buy Low Price From Here Now
18-volt Lithium-Ion cordless 6-1/2-inch circular saw, 2 built In LED lights for more illuminated accurate work, compact design, only 13-5/8-inch long & weighs only 7.1-pounds, built in dust blower to enhance the line of sight, Makita built D35 high torque motor, heavy-gauge, precision machine base for smooth, accurate cutting and added Durability.
Readmore

Technical Details

- Makita-built motor delivers 3,700 RPM for faster cutting and ripping through wood
- Compact, ergonomic design at only 7.1 lbs. for reduced operator fatigue
- Includes features such as a built-in L.E.D. light to illuminate the work area, and a built-in dust blower to keep the line of cut free of debris
- Makita LXT Lithium-Ion battery and Energy Star rated 30-Minute Rapid Optimum Charger produces 430% total lifetime work with 2.5X more cycles
- 3-year warranty on tool
See more technical details

 "Makita BSS610Z Review" 2010-02-09
By H. Moskowitz (California)
Good tool. Nice weight. Plenty of power. I've been cutting 3/4 inch shop maple plywood with it and have very little splintering cross grain. I'm still on my first battery charge (3 AH lithium ion).

 "Makita saw" 2009-12-30
By Michele A. Johnson (New York)
Transaction was simple and worked well--delivery on time. Thought it would be in a box but not really a problem.

 "Quality built, a sweet little tool." 2009-11-27
By S. Brooks (San Francisco)
1st cordless circular saw and lovin' it. Super lightweight, thin saw kerf, powerful for what it's intended for. A great addition to the toolbox so you don't have to lug out the corded 15A wormdrive all the time.

 "Professional Carpenter" 2009-06-15
By G. Olson
My 35 year old skill, as were ALL worm drive saws used by true carpenters has the blade on the left. We used to call the saws with the blade on the right home owner 'side winders'. I still don't like leaning over to see the cut. With the blade on the left you can see the cut directly in front of you and your center of gravity is directly behind the cut. Thanks Makita for another great tool.

 "Warning - This is a LEFT HANDED tool." 2009-06-14
By Systems_Consultant (Eden Prairie, Mn United States)
This is a very nice portable saw, for a left-handed person! For that user, I would rate it at 4-5 stars.



Maybe I should be more generous than a 1-star rating since the picture clearly depicts a left-handed saw if you think about how you are going to use it. But come on... we're used to disclaimers on left-handed tools and I don't remember seeing any of the customery warnings on either the website or in the instructions for this saw. What's worse is that Makita doesn't seem to make a right-handed version of a 6 1/2" cordless saw! What is Makita thinking?



My AC powered Makita circular saw is the mirror image of this one, with the blade on the right hand side of the handle. Typically, when I use a circular saw, I place the piece being cut on a surface or set of sawhorses in front of me with the section to be cut off hanging off the right hand side. Then I can hold the workpiece steady with my left hand or knee while the large part of the sole plate of the saw stays on the work that is held to the table. The cut off piece falls away to the right. If you try to use this saw that way, with the saw blade on the left hand side of the handle, only the small sliver of the soleplate to the left of the blade is resting on the stable part of the workpiece. The large portion of the soleplate under the motor is resting on the part of the workpiece that will drop away when the cut is finished. This makes it very hard to control the saw as you finish the cut. In addition to ruining the cut, this useage could be considered dangerous.



Make sure you really want a left-handed saw before buying this one.


Images Product

Buy Bare-Tool Makita BSS610Z 18-Volt LXT Lithium-Ion Cordless 6-1/2-Inch Circular Saw (Tool Only, No Battery) Now

Bare-Tool Makita BTD141Z 18-Volt LXT Lithium-Ion Cordless Impact Driver (Tool Only, No Battery)

Buy Cheap Bare-Tool Makita BTD141Z 18-Volt LXT Lithium-Ion Cordless Impact Driver (Tool Only, No Battery)

Buy Low Price From Here Now
Slide one of these batteries onto the supremely designed impact driver and youll be amazed at what you can do. Despite its size (for the record, its 5-3/4 inches long and weighs barely 3 pounds), this driver kicks out an unbelievable 1,280 in./lbs. of efficient torque, a no-load speed of 2,300 rpm and 3,200 blows per minute, putting it way out in front of the pack. We really like the integrated worklight, too. It illuminates as soon as you pull the trigger, and it stays on for 10 seconds or so after you release the trigger, too a handy little feature.
Readmore

Technical Details

- Makita-built 4-pole variable speed motor delivers 1,330 in.lbs. of Max Torque, with 2,300 RPM and 3,200 IPM
- Compact, ergonomic design at only 5-3/4 inches long; weighs just 3.4 lbs.
- Features such as a one-touch 1/4-inch hex chuck for easy bit insertion, a built-in L.E.D. light illuminates the work area, and a rugged tool belt clip
- Makita LXT Lithium-Ion battery and Energy Star rated 30-Minute Rapid Optimum Charger produces 430% total lifetime work with 2.5X more cycles
- 3-year warranty on tool
See more technical details

 "hammer drill" 2010-03-10
By Josephine Miller (ny ny)
the best cordless ever used. dropped it a 100 times still works didn't think I needed the light I was wrong.very strong and very light. batteries last long on a charge.Give as a gift have a friend forever.

 "Makita Impact Driver" 2010-02-19
By John Lynch (Auburn, WA)
Great tool. I had to get a second because my wife kept "borrowing" the tool!

 "All around best value" 2010-01-31
By quality hawk (Chicago IL)
I have been using impact drivers professionally since they were introduced many years ago (they were 9.6 volt, nicad). I rarely use them for drilling but for fastening, it is the tool of choice. This is my 3rd Makita, from the 9.6 to the 12 and now the 18 volt and I have never worn one out completely. Batteries, yes, many. Nicads didn't last all that long in number of cycles, NiMH were much better and now L-Ion which are a vast improvement. Now for this tool. Makita also makes this in a 3 speed model with brushless motor for considerably more money. Since this is not the only tool I own I have to consider cost. The 3 speeds of the other tool are unnecessary; I have absolute control of the tool thru the variable speed trigger. As far as the brushless motor with more fasteners per charge and extended motor life, yes it would be nice if cost were not a big factor but I have never worn out the tool or replaced brushes in the other Makita's. The other tool on the market that I have experience with is the Panasonic, which is at least equal to the Makita. And Panasonic has their own battery technology (they achieve the same performance using only 14.4 volts) They have the selectable 3 speed and brushless motor but are substantially more expensive. So, for less money I don't feel that I have lost. The Makita name has served me well.

 "Great Tool" 2010-01-29
By Robert Blankenship
I have a window treatment installation business. I for years swore buy my Panosonic cordless 12V becase of the light weight. I was helping a friend that has a contracting company and he gave me the impact driver to try out. What a difference this little gun made 18v and lighter then my current drill. I purchased one from Home Depot for a lot more than I could have purchased here. I will be buying the next one from Amazon.

 "Makita Impact" 2010-01-24
By W. Morrow (Honolulu, Hawaii)
I work construction and the company I build houses for uses steel studs. We use impact drivers like regular carpenters would use a hammer. This tool takes the punishment of all day use in a tough environment of heat moisture and of course dust. I buy Makita because its light yet durable. The Dewalt impact is heavier and does seem to have more torque and power but not much. I like the Lithium batteries over the old NiCads because of the need to grab a half charged battery from the charger. This would be a death blow to a NiCads life span. Finally old Dewalt is making their impacts with Lithium Batteries but more expensive. I will stick with Makita.


Images Product

Buy Bare-Tool Makita BTD141Z 18-Volt LXT Lithium-Ion Cordless Impact Driver (Tool Only, No Battery) Now

Bare-Tool Makita BJV180Z 18-Volt LXT Lithium-Ion Cordless Jig Saw (Tool Only, No Battery)

Buy Cheap Bare-Tool Makita BJV180Z 18-Volt LXT Lithium-Ion Cordless Jig Saw (Tool Only, No Battery)

Buy Low Price From Here Now
The Makita BJV180Z is a 18V LXT Lithium-Ion Cordless Jig Saw Kit. It has 4-Pole position cut settings (3 Orbital and 1 Straight) for fast and efficient cutting in all applications. The Makita BJV180s large variable speed trigger allows for total cutting control (0-2600 SPM). Bare Tool Only - No Batteries and No Charger.
Readmore

Technical Details

- Makita-built variable speed motor delivers 0-2,600 strokes per minute for fast and efficient cutting
- 3 orbital settings plus straight cutting for use in a wide range of materials
- Includes features such as a built-in L.E.D. light to illuminate the work area and a "tool-less" blade change system for more productivity
- Makita LXT Lithium-Ion battery and Energy Star rated 30-Minute Rapid Optimum Charger produces 430% total lifetime work with 2.5X more cycles
- 3-year warranty on tool
See more technical details

 "heavy" 2010-03-11
By Michael Jones (ennis,mt)
love the tool ..bought to cut out soffit vents on remodels, for proper roof ventilation systems .. love makita tools. still use my 7.2 makita cordless that I bought back in 1988.. they still make the battery..

 "Well made tool." 2010-01-07
By George Torok (Montreal, Canada)
I built the interior of a log cabin in Vermont this past summer. Did it all with just the 18 volt battery powered tools from Makita like this Jig saw. They all worked perfectly. They may not be the cheapest tools but they certainly are one of the best. This Jig Saw is solid and powerful and the battery last longer than it takes to charge one up.

 "makita 18v Li-ion cordless jigsaw" 2009-08-20
By C. troogstad (chicago il)
This was an addition to a 6 tool kit I purchased earlier. The saw is a welcome addition, it is easy to use and has plenty of power. I would like to see a speed limiting dial and the option of ordering with a rip fence. A good supplemental tool but anyone doing a lot of work should consider a good corded saw first, preferably a Bosch or Festool.

 "lxt jigsaw" 2009-03-07
By RufusB.Duck (Santa Rosa, Ca)
This is a very fine tool. The blade change is quick with no tools needed. There is a small led light and a blower to help you see the work. It is compact, even with the battery, and balances well. It comes with replaceable no-mar footplate and anti-splinter inserts. The only drawback is you still need an allan wrench to change the bevel angle of the sole plate.

 "Can you say handy?" 2009-01-11
By E. Fuller (Newnan, GA USA)
I really appreciate having this tool around. It's funny how many times I find myself using this for odd jobs or DIY projects. I use it more than I thought I would. I've cut metal hollow core doors, luan, PVC, small tree limbs (I know, poor use for this fine tool), etc. It is a bit pricy, but when you consider working without the constraint of wires, it's worth it. I've used it in my attic where there was no easy access to power. The LED was also quite useful there. To me it seems to drain the battery quickest out of my Makita LXT tools. Better have a spare.


Images Product

Buy Bare-Tool Makita BJV180Z 18-Volt LXT Lithium-Ion Cordless Jig Saw (Tool Only, No Battery) Now

Bare-Tool Makita BSS611Z 18-Volt LXT Lithium-Ion Cordless 6-1/2-Inch Circular Saw (Tool Only, No Battery)

Buy Cheap Bare-Tool Makita BSS611Z 18-Volt LXT Lithium-Ion Cordless 6-1/2-Inch Circular Saw (Tool Only, No Battery)

Buy Low Price From Here Now
Makita built, D35 high torque motor delivers maximum power for cutting 2x material at 45-degrees with 50-degrees capacity; compact design at only 13-5/8-inchlength and weighs only 6.9-pounds ( with battery, not included )for less operator fatigue; ergonomic shape fits like a glove with even pressure and easy control; heavy-gauge, precision machined base for smooth, accurate cutting and added durability; two-piece armature and field along with externally accessible brushes for serviceability and longer motor life.
Readmore

Technical Details

- Makita-built motor delivers 3,700 RPM for faster cutting and ripping through wood
- Compact, ergonomic design at only 6.9 lbs. for reduced operator fatigue
- Designed with a large 2-1/4-inch cutting capacity at 90 degrees
- Makita LXT Lithium-Ion battery and Energy Star rated 30-Minute Rapid Optimum Charger produces 430% total lifetime work with 2.5X more cycles
- 3-year warranty on tool
See more technical details

 "Cut through wood like butter." 2010-01-31
By Fabian Lamaestra (San Jose, CA)
I have the Makita's BSS610 and I love it. I fast battery charger makes it so I always have power.



This unit spins up fast and cuts like the wind, just keep the batteries fresh or it will lose spin-power on you quick.



I found I could cut about 30-60 2x4s easily with a single 1.5 Amp battery. The 3.0 amp battery is nice, but the quick charger takes care of me with a pair of 1.5 amp batts.

 "Well Designed and Manufactured" 2010-01-21
By Phil (Essex, Vermont)
Has a die cast machined base plate that makes for smooth and accurate cuts. The trigger and safety thumb switch are very easy to use right or left handed compared to the DeWalts' I have been using. Well balanced with the Lithium battery. Another neat feature is the depth gauge on the blade guard that makes for easy setting of the blade depth. This saw more than met my expectations.

 "Saw Works Great!" 2010-01-11
By Todd M. Fredette
I bought this saw as a "house-warming" gift to myself. I was going to need it for some work around the new place, it the comes in handy all the time. It's plently powerful even for pressure treated lumber. I rate it as a great purchase especially if you already have a collection of Makita LXT tools....

 "Cowboy Up Contracting" 2009-07-10
By Cowboy Up Contracting (Austin, TX)
Got this in the mail two days ago. I intended on using until I got my DeWalt runnig again (Ipe and remodeling, is hard on chordless saws). Well I put it through the paces today w/ the Makita blade that came on it none the less. And it is now the main tool and the DeWalt is the back up. I can't wait till I get the Freud Diablo blade on it to see what it can really do! Easy to use rip fence, good eurognomics, smooth running and powerful. A great chordless saw. Won't replace the corded Bosch but it rocks!

 "Not the saw I thought." 2009-02-04
By Joe Bosco
This is NOT the saw with the LED lights to guide your cuts. It is a stripped-down version of the saw I thought I was ordering. Poorer quality base & mitre guide as well. I'd like to return it but too much of a hassle.


Images Product

Buy Bare-Tool Makita BSS611Z 18-Volt LXT Lithium-Ion Cordless 6-1/2-Inch Circular Saw (Tool Only, No Battery) Now